НЕКОТОРЫЕ
ОСОБЕННОСТИ ЛИТЬЯ В ГИПСОВЫЕ ФОРМЫ
SOME PROPERTIES OF
PLASTER MOULD CASTING
Свиридов Андрей Владимирович - кандидат
технических наук, доцент кафедры «Машины и технология литейного производства» Комсомольского-на-Амуре
государственного технического университета (Россия, Комсомольск-на-Амуре). Mr.Andrey V. Sviridov - PhD in Engineering, Associate Professor at
the Department of Foundry Machinery and Technology, Komsomolsk-on-Amur State
Technical University.
Аннотация. В статье приводится краткое описание
процесса изготовления литейных гипсовых форм, область их использования,
достоинства и недостатки. Описано влияние различных факторов на свойства форм
и качество получаемых отливок. Также отражены сведения об используемых формовочных
материалах и приведены некоторые составы известных гипсовых смесей.
Summary. The
paper presents a short description of the process of manufacturing plaster moulds, their applications, advantages and shortcomings.
Characterized is the work of different factors and their impact on the moulds’ properties and onthe
quality of the resulting casts. Also the authors have
reviewed available data on molding materials in use and on the composition of
certain well-known plaster blends.
Ключевые слова: гипсовая литейная форма, гипсовая смесь,
цветное литье, художественное литье, ювелирное литье.
Key words: plaster
mould, plaster blend, nonferrous castings, ornamental
castings, jewelry casting.
«Ученые записки
КнАГТУ». № II - 1(6) 2011 «Науки о природе и технике»
с. 44 - 47
«Scholarly Notes of Komsomolsk-na-Amure State Technical University». Issue II - 1(6) 2011 "Engineering and
Natural Sciences"
DOI 10.17084/2011.II-1(6).7
References
1. Ivanov V.N. Spetsial'nye vidy lit'ia: Uchebnoe
posobie / pod red. V.S. Shuliaka.
– M.: MGIU, 2007. – 316 s.; il.
142; tabl.22.
2. Spetsial'nye sposoby lit'ia: Spravochnik/V.A. Efimov, G.A. Anisovich, V.N. V.N. Babich i dr., Pod red. V.A. Efimova. –
M.: Mashinostroenie, 1991. – 436 s.: il.
3. O.E. Kestner, V.K.Buradan'iants. Tochnoe lit'e tsvetnykh splavov v gipsovye i kera-micheskie formy. M.: Mashinostroenie, 1973, 287 s.
Ссылка на
текст статьи
© 2011 Sviridov A. V. This is an Open
Access article distributed under the terms of the Russian Index of Science
Citation License http://www.uzknastu.ru/files/forautors/en/License%20Agreement.doc,
allowing third parties to copy and redistribute the material in any medium or
format and to remix, transform, and build upon the material for any purpose,
even commercially, provided the original work is properly cited and states its
license.
© 2011 Свиридов А. В. Данная
статья находится в Открытом Доступе и распространяется на условиях лицензии
Российского Индекса Научного цитирования http://www.uzknastu.ru/files/forautors/en/License%20Agreement.doc,
в соответствии с которыми третьи лица имеют право копировать и повторно
распространять этот материал на любых носителях и в любом формате, а также
микшировать, изменять и использовать в качестве основы для любых целей, в том
числе коммерческих, при условии, что на оригинальное произведение сделаны
должным образом оформленные ссылки и что приведена информация о действующей в
отношении него лицензии.