ОСОБЕННОСТИ СБОРКИ КОНТЕЙНЕРА ТОРМОЗНОГО ПАРАШЮТА САМОЛЕТА

ON ASPECTS OF AIRCRAFT BRAKING PARACHUTE CONTAINER ASSEMBLING


Гусева Роза Ивановна – кандидат технических наук, профессор кафедры «Технология самолетостроения», зам. декана самолетостроительного факультета Комсомольского-на-Амуре государственного университета (Россия, Комсомольск-на-Амуре). E-mail: r_guseva@knastu.ru

Mrs. Rоza I. Guseva – PhD in Engineering, Professor, Aircraft Building Technology Department, Deputy Dean of Aircraft Building Faculty, Komsomolsk-on-Amur State University (Russia, Komsomolsk-on-Amur). E-mail: r_guseva@knastu.ru.


Аннотация. Аннотация. Рассмотрены особенности сборочных операций на примере сборки контейнера тормозного парашюта самолета, приведена методика оценки точности сборки, выбран метод увязки для обеспечения взаимозаменяемости контейнеров тормозных парашютов, предложен вариант контейнера с разрезной внутренней обшивкой вместо сварной. Приведен вариант схемы членения контейнера, который обеспечивает оптимальный цикл сборки. Использован плазово-эталонный метод обеспечения взаимозаменяемости контейнеров, выбрано базирование по внешней поверхности обшивки. Проведена оценка точности сборки внешнего контура контейнера с использованием вероятностной методики расчета ожидаемой точности с привлечением статистических характеристик и отклонений размеров деталей и оснастки. Представлен перечень директивных сборочных операций для сборки контейнера, определен цикл основных сборочных операций и цикл сборки контейнера тормозного парашюта при организации односменной работы в сутки. Предложен вариант модернизации конструкции внутренней обшивки для обеспечения лучших условий труда при сборке. Для составления схемы сборки контейнера тормозного парашюта разработаны условия поставки основных деталей и сборочных единиц на сборку.

Summary. Summary. The features of assembly operations are considered using the example of assembling an aircraft braking parachute container; a method for estimating the assembly accuracy is presented; a method of linking is chosen to ensure the interchangeability of the brake parachute containers; a variant of a container with a split inner shell instead of a welded one is proposed. A variant of the container partitioning scheme that provides the optimal assembly cycle is given. A flat-standard method was used to ensure the interchangeability of containers, the basing on the outer surface of the skin was chosen. The accuracy of assembling the outer contour of the container was estimated using the probabilistic technique of calculating the expected accuracy with the use of statistical characteristics and deviations in the dimensions of parts and equipment. The list of directive assembly operations for the container assembly is presented, the cycle of the main assembly operations and the assembly cycle of the brake parachute container are determined in the organization of one-shift work per day. A variant of modernization of the internal cladding design is proposed to provide better working conditions during assembly. For the drawing up of the scheme for assembling the container of the brake parachute, conditions for the delivery of the main parts and assembly units for the assembly have been developed.


Ключевые слова: Ключевые слова: точность, взаимозаменяемость, способы базирования, агрегат, плазово-шаблонный, технология сборки.

Key words: Key words: accuracy, assembly, replace, substitute, assembly, aircraft, pattern, mould.


«Ученые записки КнАГТУ». № I - 1(33) 2018 «Науки о природе и технике», с. 4 - 11

«Scholarly Notes of Komsomolsk-na-Amure State Technical University». Issue I - 1(33) 2018 «Engineering and Natural Sciences», p. 4 - 11


DOI 10.17084/II-1(33).1


References


1. Guseva, R. I. Tekhnologicheskaia osnastka v sborochnykh protsessakh pri proizvodstve samoletov: ucheb. posobie / R. I. Guseva.  Komsomol'sk-na-Amure: FGBOU VO «KnAGTU», 2016.  122 s.

2. Sovremennye tekhnologii aviastroeniia / pod red. A. G. Bratukhina, Iu. L. Ivanova. – M.: Mashinostroenie, 1999. – 532 s.

3. Guseva, R. I. K voprosu rascheta tochnosti sborki uzlov i agregatov / R. I. Guseva // Uchenye zapiski Komsomol'skogo-na-Amure gosudarstvennogo tekhnicheskogo universiteta. Nauka o prirode i tekhnike. – 2011. – № I-1(5). – S. 16-22.


Ссылка на текст статьи

Текст статьи в журнале

Text of article in journal


© 2018 R. I. Guseva. This is an Open Access article distributed under the terms of the Russian Index of Science Citation License http://www.uzknastu.ru/files/forautors/en/License%20Agreement.doc, allowing third parties to copy and redistribute the material in any medium or format and to remix, transform, and build upon the material for any purpose, even commercially, provided the original work is properly cited and states its license.


© 2018 Гусева Р. И. Данная статья находится в Открытом Доступе и распространяется на условиях лицензии Российского Индекса Научного цитирования http://www.uzknastu.ru/files/forautors/en/License%20Agreement.doc, в соответствии с которыми третьи лица имеют право копировать и повторно распространять этот материал на любых носителях и в любом формате, а также микшировать, изменять и использовать в качестве основы для любых целей, в том числе коммерческих, при условии, что на оригинальное произведение сделаны должным образом оформленные ссылки и что приведена информация о действующей в отношении него лицензии.


Лицензия Creative Commons

Произведение «ОСОБЕННОСТИ СБОРКИ КОНТЕЙНЕРА ТОРМОЗНОГО ПАРАШЮТА САМОЛЕТА» созданное автором по имени Гусева Р. И., публикуется на условиях лицензии Creative Commons «Attribution» («Атрибуция») 4.0 Всемирная
Основано на произведении с http://www.uzknastu.ru/files/translit/2018/I-1(33)/1.htm