АНАЛИЗ СТРУКТУР МЕТАЛЛОИЗДЕЛИЙ, ПОЛУЧЕННЫХ НА ЛИТЕЙНО-КОВОЧНОМ
МОДУЛЕ
ANALYSIS OF THE
STRUCTURES OF METAL ITEMS MANUFACTURED AT A FOUNDRY-FORGING MODULE
Черномас
Вадим Владимирович - доктор технических наук, доцент, заведующий лабораторией
Института машиноведения и металлургии ДВО РАН (Россия, Комсомольск-на-Амуре).
Mr.Vadim V. Chernomas - Doctor in Engineering, Associate
Professor, Head of Laboratory at the Institute for
Machine Engineering and Metallurgy of the Far-Eastern Branch of Russian Academy
of Sciences (Komsomolsk-on-Amur).
Лушников Никита Юрьевич - аспирант
Института машиноведения и металлургии ДВО РАН (Россия, Комсомольск-на-Амуре). E-mail:
raziel.soul@mail.ru.
Mr. Nikita Yu. Lushnikov
- PhD Candidate, Institute for Machine Engineering and
Metallurgy of the Far- Eastern Branch of the Russian Academy of Sciences
(Komsomolsk-on-Amur); e-mail: raziel.soul@mail.ru.
Аннотация. В Институте машиноведения и металлургии
ДВО РАН разработан и изготовлен литейно-ковочный модуль, позволяющий получать
из расплавленного металла в непрерывном режиме деформированный профиль
заданного поперечного сечения. В статье приводятся данные металлографических
исследований образцов непрерывнолитых деформированных
заготовок (НЛДЗ) из стали марки Ст3, а также их сравнение со структурами литых
тест-образцов. Представлены результаты оценки размерно-геометрической точности образцов НЛДЗ.
Summary. At the
Institute for Machine Engineering and Metallurgy of the Far-Eastern Branch of
Russian Academy of Sciences, a Foundry-Forging Module was designed and
manufactured that allows to continuously produce a deformed profile of the
predetermined cross-section from molten metal. The paper presents data from
metallographic research on samples of continuously cast deformed blanks made
from St.3 steel, and also their comparison with
structures found in cast test-pieces. Also the results
of the assessment of dimension/geometrical accuracy of the samples of
continuously cast deformed blanks are offered.
Ключевые слова: структура, непрерывнолитая
деформируемая заготовка, литейно-ковочный модуль.
Key words: structure,
concast
deformed billet, foundry-forging module.
«Ученые записки
КнАГТУ». № II - 1(6) 2011 «Науки о природе и технике»
с. 68 - 70
«Scholarly Notes of Komsomolsk-na-Amure State Technical University». Issue II - 1(6) 2011 "Engineering and
Natural Sciences"
DOI 10.17084/2011.II-1(6).12
References
1. Teoreticheskoe i eksperimental'noe issledovanie nepreryvnogo protsessa kristallizatsii metalla pri odnovremennom
ego deformirovanii / Odinokov
V.I., Proskuriakov B.I., Chernomas
V.V. - M.: «Nauka». 2006 – 111s.
Ссылка на
текст статьи
© 2011 Chernomas V. V., Lushnikov N. Yu. This is an Open Access article distributed under the terms of the
Russian Index of Science Citation License
http://www.uzknastu.ru/files/forautors/en/License%20Agreement.doc, allowing third
parties to copy and redistribute the material in any medium or format and to
remix, transform, and build upon the material for any purpose, even
commercially, provided the original work is properly cited and states its
license.
© 2011 Черномас В. В., Лушников Н. Ю. Данная
статья находится в Открытом Доступе и распространяется на условиях лицензии
Российского Индекса Научного цитирования
http://www.uzknastu.ru/files/forautors/en/License%20Agreement.doc, в
соответствии с которыми третьи лица имеют право копировать и повторно
распространять этот материал на любых носителях и в любом формате, а также
микшировать, изменять и использовать в качестве основы для любых целей, в том
числе коммерческих, при условии, что на оригинальное произведение сделаны должным
образом оформленные ссылки и что приведена информация о действующей в отношении
него лицензии.